Electric Motor Control | How to use RCP to Validate Electric Motors & Power Converters, Part 2
In part 2 of this series, learn how to deploy and test a field-oriented control (FOC) algorithm with a PMSM motor using Speedgoat® hardware for rapid control prototyping. Explore how to:
- Transition from desktop simulation to real-time testing by adding and configuring Speedgoat I/O driver blocks for PWM generation and quadrature decoding
- Read phase currents with synchronized analog inputs
- Leverage Simulink® dashboard blocks as a graphical user interface to interact with the target computer
- Use the Field Oriented Control Autotuner block from Motor Control Blockset™
- Deploy the algorithm to an FPGA by using HDL Coder™ to increase the achievable sampling frequency
Posts
I am new to the Satta king result and one of recommend me your blog for getting experience, after reading just one post and I am here to comment, your style of writing, and provide updated information is the best on internet. Thanks buddy for recommend me this blog.
ReplyDeleteFive Start Content!!!
ReplyDeleteI really like your content, not only because of information but also you covered almost every topic on Satta king 786. It is difficult for every writer to write for a game which is entirely based on luck and winning a money is not an easy job, but you knowledge nailed it very well. Thank you.