Impact-Site-Verification: dbe48ff9-4514-40fe-8cc0-70131430799e

Search This Blog

How to Connect and Set Up a USRP N310 with MATLAB?

 Connect and set up a USRP™ N310 SDR using the Radio Setup wizard with Wireless Testbench™ and MATLAB®.

You can install the required firmware on a microSD card, configure the network connection between your radio and host computer, physically connect the radio to the host computer, validate your setup, and run a MathWorks example.

Once you have set up your radio, you can use MATLAB to detect, capture, and transmit radio signals.

The workflow shown is also mostly applicable to USRP N320s, N321s, X310s, and X410s.

Learn more:

- Wireless Testbench Support Package for NI USRP Radios: https://bit.ly/4bufjKf

- Install Support Package for NI USRP Radios: https://bit.ly/3HQfged

- Connect and Set Up NI USRP Radios: https://bit.ly/3unS4Rw

- Reference Information for NI USRP Radio Setup Wizard: https://bit.ly/3SPCdVi

- Wireless Testbench Examples: https://bit.ly/3Q7UQ3p



No comments

Popular Posts

Followers